Toro 32in Recycler 30118 Manual

32in Recycler Kit
for Fixed Deck Mid–Size Mowers
Model No. 30118
Loose Parts
Note: Use the chart below to identify parts for assembly.
DESCRIPTION
Baffle
Bolt, 5/16 x 5/8 inch
Flange nut, 5/16 inch
Blocker plate
Bolt, 3/8 x 1 inch
Flange nut, 3/8 inch
Bolt, 1/4 x 3/4 inch
Flange nut, 1/4 inch
Cover plate
Bolt, 3/8 x 3/4 inch
Flange nut, 3/8 inch
Kicker
Bolt, 5/16 x 5/8 inch
Flange nut, 5/16 inch
Recycler blade
Preparing the Mower
1. Remove belt cover from top of mower.
2. Thoroughly clean underside of the mower. All debris
must be removed to ensure that baffles and kickers will
fit properly against the cutting chamber.
3. Tilt the mower up and support with jack stands to ease
installation of kit.
4. Flip up discharge chute and remove the discharge baffle
near discharge opening (Fig. 1).
2004 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
QTY.
1
1 Install the Recycler baffle
6
1
1
Install the blocker plate
1
2
2
1
4 Install the cover plate
4
2
4 Install the kickers
4
2 Replace standard blades on mower
Note: Replace hardware in top of mower when baffle is
removed for safety and to save for use when using mower
to side discharge.
Form No. 3350-108
Installation Instructions
USE
Contact us at www.Toro.com
All Rights Reserved
Printed in the USA