Table of Contents
Advertisement
RF MODULATOR CONNECTION
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available
stereo audio/video RF modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator's channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch to.
For more details, follow the manual supplied with the RF modulator.
VHF / UHF
antenna
or
cable TV
company
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.
16
16
EN
EN
E2H42UD_DVDR3576H-37_EN.indd 16
E2H42UD_DVDR3576H-37_EN.indd 16
IN
OUT
ANTENNA
RF coaxial
cable
IN
OUT
ANTENNA
rear of your RF modulator
RF coaxial cable
Set channel 3 or 4
VIDEO
VIDEO
IN
OUT
Y
/C
B
B
HDMI OUT
L
R
IN
COAXIAL OPTICAL
DIGITAL AUDIO OUTPUT
AV IN
S-VIDEO
PCM / BITSTREAM
VIDEO
OUT
L
RCA video
cable
R
AV OUT
RCA audio cable
ANT. IN
(not supplied)
3
4
R
L
ANT. IN
CHANNEL
AUDIO IN
VIDEO IN
TO TV
rear of this unit
rear of your TV
RF coaxial cable
2007/12/28 11:14:48
2007/12/28 11:14:48
Advertisement
Table of Contents
