Table of Contents
Advertisement
HDMI
HDD & DVD RECORDER
1
Press [SETUP] and use [K / L] to
select "General Setting", then press
[OK].
"General Setting" menu will appear.
2
Use [K / L] to select "HDMI", then
press [OK].
112 EN
112 EN
E2H42UD_DVDR3576H-37_EN.indd 112
E2H42UD_DVDR3576H-37_EN.indd 112
SETUPS
3
Use [K / L] to select a desired item,
then press [OK].
1
Format
2
HDMI Audio
3
RGB Range
4
Refer to 1 to 3 on this page and set
the selected item.
5
When you finish with setting, press
[SETUP] to exit.
1
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [OK].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Format
Your setting will be activated.
2
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the DIGITAL
AUDIO OUT jack to your audio system, etc.), you can set
the HDMI audio output off.
Use [K / L] to select a setting, then press [OK].
• Set to "OFF" when not outputting the HDMI sound.
HDMI Audio
Your setting will be activated.
3
RGB Range (Default : Normal)
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [OK].
• Select "Enhanced" if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
RGB Range
Your setting will be activated.
RGB
YCbCr
ON
OFF
Normal
Enhanced
2007/12/28 11:16:30
2007/12/28 11:16:30
Advertisement
Table of Contents
