Technical Specifications And Connection Facilities - Philips DVDR3570H/05 Service Manual

1. Technical Specifications and Connection Facilities

1.1. PCB Locations
HDD
1.2. General
Mains voltage:
Mains frequency:
Power consumption (DVDR3570H):
Power consumption (DVDR3590H):
Standby Power consumption:
1.3. RF Tuner (Analogue)
Test equipment: Fluke 54200 TV Signal generator
Test streams: PAL BG Philips Standard test pattern
1.3.1.1. System
B/G, I, L/L', D/K
1.3.2. RF – Loop Through:
Frequency range:
Gain (ANT IN – ANT OUT) standby mode:
Gain (ANT IN – ANT OUT) active mode:
1.3.3. Receiver
Output of Euro connector/Cinch to be used for measurements (direct output from front end)
Video Performance:
Frequency response (0 - 4.4 MHz):
Group delay (0 - 4.4 MHz):
Audio Performance (Analogue Mono):
Frequency response (100 Hz – 12 kHz) relative to 1 kHz:
Front Boards (Behind
the Front Plate)
Digital Board
Analog Board
220V-240V
50 Hz
28 W
32W
<3.7W
Basic Engine
PSU Board
43 MHz – 860 M Hz
-2.5 dB to -4dB
2 dB± 4dB
0 ± 4dB
0 ± 150 n sec
0 ± 3dB