CDA DC730 Series Manual For Installation, Use And Maintenance page 33

Connection the Double Oven Mains Cable
Important!
This oven must be connected to the mains power supply only by a suitably qualified person.
Unscrew the screws A securing the cover plate B behind the oven (fig. 44).
– Remove the cover plate B.
– Remove the screws C from the cable clamp (fig. 45).
– Insert the mains cable (type H05RR-F or H05VV-F - 3x2,5 mm
– Connect the phase and earth cables to the mains terminal connection block D.
EARTH
N NEUTRAL
L LIVE
– Refit the cable clamp so that it clamps the outer sleeving of the cable, and screw the screws C.
– Refit the cover plate B and fix it with the screws A.
WARNING: This appliance must be earthed
2
section) into the cable protector P.
A
A
Brown (Live)
B B
Blue (Neutral)
Fig. 44
P
C
33
D
Green
&
Yellow
(Earth)
Fig. 45