CDA DC730 Series Manual For Installation, Use And Maintenance page 28

28
Installation "C" By Using Housing Unit
(figs. 37, 38, 39)
• Remove the single oven shelf, if fitted, as indicated in figure 37.
• Remove the upper cross member support as indicated in figure 38.
• Cut the bottom of the housing as indicated in figure 38.
• Screw oven base housing to adjoining cabinetry by suitable screws (not supplied) as indicated in
figure 39.
• Check the position of the cabinet legs to ensure the cut-out does not interfere with the legs support.
Otherwise the cabinet may have to be removed as in INSTALLATION TYPE "B".
• Mount the 2 (two) metal supports "B" (supplied with the appliance in a separate kit) as indicated in
Figs. 39).
• Build in the double oven making it slide on the metal supports "B".