Olympus DP21-SAL Instructions Manual page 62

Monitor resolution setting
Set the resolution value of the monitor in use.
The resolution values that cannot be displayed on the connected monitor are not listed.
The following resolution values can be selected.
1920 x 1200 WUXGA (image display area 1600 x 1200)
1920 x 1080 FHD (image display area 1600 x 1080)
1680 x 1050 WSXGA+ (image display area 1280 x 960)
1280 x 854 WSXGA (image display area 1024 x 768)
1280 x 768 WXGA (image display area 1024 x 768)
1024 x 600 WSVGA (image display area 800 x 600)
1600 x 1200 UXGA
1280 x 1024 SXGA (image display area 1280 x 960)
1280 x 960 SXGA
1024 x 768 XGA
800 x 600 SVGA
}If nothing is displayed due to inappropriate resolution, set the main switch to OFF then ON again. In about 30 seconds
after the instrument is started up, the AE Lock LED lights up for about 1 second. Press the MENU button while the AE Lock
LED is lit. This will start up the instrument with the SVGA 800 x 600 resolution.
Version infomation
The version information of the camera can be displayed.
Select the [VER] icon in the MENU display and press the [OK] button. The following version information will be displayed.
GUI application version (DPE-BSW)
Library versions (CamDriver.dll, DP1394API.dll, DPEOSif.dll)
Camera firmware version (Camera Firm)
Camera FPGA version (Camera FPGA)
System version (OS)
BIOS version (BIOS)
System setting version (UNIT MODE, RESULT MODE)
CAMERA HEAD
59
Downloaded from ManualsNet.com search engine