Dell Latitude 7330 Rugged Extreme Service Manual page 98

About this task
The following image indicates the location of the display panel and provides a visual representation of the installation procedure.
Steps
After performing the succeeding steps, you are left with the display panel.
Next steps
1. Install the display cable.
2. Install the display hinges.
3. Install the camera.
4. Install the display bezel.
5. Install the display assembly.
6. Install the system board.
7. Install the heat-sink (UMA).
8. Install the fan.
9. Install the smart card reader I/O
10. Install the smart card
11. Install the GPS board.
12. Install the inner frame.
13. Install the express card
14. Install the rear I/O board.
15. Install the dock I/O board.
16. Install the WWAN card.
17. Install the WLAN card.
18. Install the RF switch board.
19. Install the base cover.
20. Install the keyboard.
21. Install the primary M.2 2280 solid state drive
22. Install the battery.
23. Follow the procedure in
98 Removing and installing components
board.
reader.
reader.
or
after working inside your
primary M.2 2230 solid state
computer.
drive.