Dell Latitude 7330 Rugged Extreme Service Manual page 115

Table 18. System setup options—Keyboard menu (continued)
Keyboard
Lock Mode
Keyboard Illumination
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on
Battery
Device Configuration Hotkey Access
RGB Keyboard Backlight
Table 19. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings
Warning and Errors
USB-C Warnings
Enable Dock Warning Messages
Fastboot
Extend BIOS POST Time
MAC Address Pass-Through
Table 20. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
VT for Direct I/O
By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F2 keys scan the code for their secondary functions.
Enables to change the keyboard illumination settings.
By default, the Level is 100% option is enabled.
Set the timeout value for the keyboard backlight when an AC adapter is
connected to the system.
By default, the 10 seconds option is enabled.
Set the timeout value for the keyboard backlight when the is running only on
battery power.
By default, the 10 seconds option is enabled.
Manages whether you can access device configuration screens through
hotkeys during system startup.
By default, the option is enabled.
Configures the RGB keyboard backlight feature.
By default, the White, Red, Green, Blue are enabled.
Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.
By default, the option is enabled.
Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
By default, the option is enabled.
Allows you to configure the speed of the UEFI boot process.
By default, the Minimal option is enabled.
Set the BIOS POST load time.
By default, the 0 seconds option is enabled.
Replaces the external NIC MAC address with the selected MAC address from
the system.
By default, the Passthrough MAC Address option is enabled.
When enabled, the system will be able to run a Virtual Machine Monitor
(VMM).
By default, the option is enabled.
When enabled, the system will be able to perform Virtualization Technology for
Direct I/O (VT-d).
BIOS setup 115