Toshiba B-FV4D-GH Series Quick Installation Manual page 8

NOTE: Media path
For the outside-wound media
Feed Gap Sensor
Platen
For the inside-wound media
Feed Gap Sensor
Platen
NOTES:
1. Make sure that the print side
faces up.
2. Cut the leading edge of the
media straight with scissors.
1. Open the Top Cover while pulling the Lock Release Portions as
indicated by the arrows.
Top Cover
2. Press the Media Roll Holder Lever down and outward, set the
media between the Media Roll Holders ensuring that the
printing side is facing up. Release the Media Roll Holder Lever
to clamp the media roll securely.
Media Roll Holder Lever
E-8
Lock Release Portion