Advertisement
NOTES:
1. To separate the printed
media from the printer in
batch mode, be sure to
tear the media off at the
Media Outlet or cut the
media past the Strip Plate.
If you tear the media off at
the Print Head by mistake,
be sure to feed one label
(10 mm or more) with the
FEED Button prior to the
next issue. Failure to do
this may cause a paper
jam.
2. When using inside wound
media and printing without
tearing off previously
issues labels the "Forward
Feed Wait" function
should be set to off using
the printer setting tool.
Failure to do so can cause
paper jams.
5. Close the Top Cover gently, then press the [FEED] button to check
the media feeds correctly.
FEED Button
There are two issue modes available for this printer.
Batch mode:
In the batch mode, the media is continuously printed and fed until the
number of prints specified in the issue command has been printed.
E-10
Advertisement
