HP ProLiant SL160z G6 Maintenance And Service Manual page 67

•
View CPU type / CPU speed /CPU physical count information.
•
View System memory size.
•
View System serial number.
•
View MAC address for the embedded NIC.
•
Set Server Asset Tag.
•
Set system time and date.
•
Set boot features:
○
Enable or Disable POST Speed up.
○
Enable or Disable Bootup Num-Lock.
○
Set restore on AC power loss options, such as last state, power off, and power on.
○
If BIOS displays an error message, set POST F1 Prompt for selections, such as delayed,
enabled, or disabled.
Advanced Menu
Figure 56 Advanced menu of the BIOS Setup Utility 1
WARNING: Incorrect settings may cause the server to malfunction. To correct the settings, press F9
key to restore the default settings.
•
CPU Configuration –You can use this screen to select options for the CPU Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option. A description of the selected item appears on the right
side of the screen. The settings are described on the following pages.
•
CPU Bridge Configuration –You can use this screen to select options for the CPU Bridge Chipset
Configuration Settings. Use the up and down <Arrow> keys to select an item. A description of
the selected item appears on the right side of the screen. The settings are described on the
following pages.
•
SATA Configuration –You can use this screen to select options for the S-ATA mode settings. Use
the up and down <Arrow> keys to select item. Use the <Plus> and <Minus> keys to change the
value of the selected option. The settings are described on the following pages.
All manuals and user guides at all-guides.com
Diagnostic tools and Setup Utilities 67