HP ProLiant SL160z G6 Maintenance And Service Manual page 49

All manuals and user guides at all-guides.com
Figure 34 System battery location
WARNING: Note the following reminders when replacing the system battery:
•
Replace the battery with the same type as the battery recommended by HP. Use of another battery may
present a risk of fire or explosion.
•
A risk of fire and chemical burn exists if the battery is not handled properly. Do not disassemble, crush,
puncture, or short external contacts, or expose the battery to temperatures higher than 60°C (140°F).
•
Do not dispose of used battery in water or fire. Dispose of used batteries according to manufacturer's
instructions.
CAUTION: Loss of BIOS settings occurs when the battery is removed. You must reconfigure BIOS
settings whenever you replace the battery.
NOTE: If the server no longer automatically displays the correct date and time, you may need to
replace the system battery. Under normal usage, battery life is five to ten years.
To replace the system battery:
To release the battery from its holder, squeeze the metal clamp that extends above top of the
1.
battery. When the battery pops up, lift it out.
To insert the new battery, slide one edge of the replacement battery under the holder's lip with
2.
the positive side facing the metal clamp. Push the other edge down until the clamp snaps over
the top of the battery.
Removal and Replacement Procedures 49