HP ProLiant SL160z G6 Maintenance And Service Manual page 41

All manuals and user guides at all-guides.com
Figure 19 Removing a Memory module
CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static
bag.
To install a memory module:
Align the notch on the bottom edge of the module with the keyed surface of the DIMM slot and
1.
then press the module fully into the slot.
Firmly press the holding clips inward to secure the memory module in place.
2.
Figure 20 Installing a Memory module
CAUTION: The memory slots are structured to ensure proper installation. If you insert a memory
module but it does not fit easily into the slot, you may have inserted it incorrectly. Double-check the
orientation of the module and reinsert. If the holding clips do not close, the module is not inserted
correctly.
NOTE: The ProLiant SL160z G6 server supports up to 32 memory modules. Install them in the DIMM
slots starting from the DIMM 1 slot.
Removal and Replacement Procedures 41