Table of Contents
Advertisement
This chapter describes how to use the "System settings".
Most settings and adjustments are required to be set when
you first use the unit.
1
In other than iPod mode, press and hold the MENU
button for more than 2 seconds.
more than 2 sec.
< In iPod mode, you can not enter the System settings. Press the
Mode button to change the mode, and then press and hold
the MENU button for more than 2 seconds.
2
Turn the MULTI JOG to select "Main menu", and then
press the SELECT button.
Example: In the Internet radio mode
Internet radio
Last lietened
Station list
Main menu
3
Turn the MULTI JOG to select "System settings", and
then press the SELECT button.
Main menu
iPod
Auxiliary Input
Sleep
Alarms
System settings
< If you want to return to the previous menu, press the BACK
button.
12
12
System Settings
Hold down
>
>
>
4
Turn the MULTI JOG to select the item you want to
change, and then press the SELECT button.
System settings
Equalizer
Network
Time/Date
Language
Factory Reset
5
Turn the MULTI JOG to change the setting, and then
press the SELECT button.
Repeat steps
4
and
5
as required.
< The current setting is marked with a "
< See "Available menu items and settings" below for Individual
menu functions.
< If no button is pressed for more than 10 seconds, current
menu will be canceled and return to the previous display.
6
Press and hold the MENU button to exit the setup
mode.
< Settings are stored even when power is turned off and the
unit is unplugged.
Available menu items and settings
Equalizer
See "Equalizer" on page 15.
Network
Enable you to scan again for connection to another wireless
network, or to manually configure the network parameters.
Internet Wizard
Proceeds to the internet wizard.
PBC Wlan setup
Setting the Wi-Fi Protected Setup (WPS) between the wireless
access point and R-4iNT.
Select WPS on the wireless access point, and then press the
SELECT button on the R-4iNT.
>
>
>
>
".
Advertisement
Table of Contents
