Table of Contents
Advertisement
3 – Names and Functions of Parts
locate to the head of the song (RTZ) or
the last recording start position (LRP).
(See "Return To Zero (RTZ) and Last
Recording Position (LRP)" on page 54.)
g
/LRP key
Press this key when the transport is
stopped or playing to fast forward. Press
it again to change the speed from 10x to
50x, again for 100x and 1000x.
If you press this key while holding down
the stop
·
key, the transport will locate
(
)
to the last recording start position (LRP).
(See "Return To Zero (RTZ) and Last
Recording Position (LRP)" on page 54.)
Á
h
Playback (
) key
Press this key to start playback. While
pressing the record
to start recording. Press this key again
when recording to stop recording and start
playback (punch out).
j
REPEAT key
Turns the repeat playback mode on and
off. (See "Repeat playback" on page 55.)
Front panel
MIC A/B
;
These are built-in omnidirectional
microphones. They can be set as input
sources for
INPUT A/B
or
Low
Internal MIC/Hi gh
26
TASCAM DP-008
–
key, press this key
(
)
(
Internal MIC/
).
Record (–) key and indicator
k
Press the playback
this key to start recording. The indicator
lights when recording. If you press this
key when any of the track
is blinking, or during playback, recording
will begin (punch in). (See "Punching in
and out" on page 52.)
Press the
key while pressing and
IN/OUT
holding this key to enter auto punch in/out
mode.
IN/OUT key
l
Press this key to open the
screen, and to set IN (starting) and OUT
(ending) points for repeat playback and
track editing. (See "Setting IN and OUT
points" on page 55.)
Press this key while pressing and holding
the recording (
) key to enter auto punch
–
in/out mode.
key while pressing
Á
(
)
indicators
REC
I /O SETTING
Advertisement
Table of Contents
