Tascam DP-008 Owner's Manual page 80

13 – Messages
Messages
Same T rack
Song Protected
T oo Many songs
T rack Ful l
T rk T oo Short
No SD Card
I
nval id Card
Protected Card
Card Ful l
T rk Edi t F ai l
Battery Empty
Battery Low
SD Size Error
Work Memory Ful l
SD Not Found
SD Read Busy
SD Wri te Busy
I
/F Error
F i leErr
Audio Rst F ai l
SaveParam F ai l
Mount Error
SD-Card Error !
FX Rx F ai led
FX Busy
80
TASCAM DP-008
You cannot clone a track to itself. ("CLONE track (track duplication)" on
page 62.)
The song is protected ("Protecting songs" on page 40) and you are trying
to change it (record or edit, etc.). Unprotect the song.
You have 250 songs on one partition. You must delete some before you
can create another song.
This message appears if you try to import a file when all tracks already
have recordings. (See "Importing tracks" on page 75.)
You are trying to master with the OUT point at the zero position
("Mixdown" on page 45 and "Mastering" on page 48). Set the OUT point
("Setting IN and OUT points" on page 55) and try again.
Insert an SD card after turning off the unit.
Insert another SD card after turning off the unit, or format the card by
® ®
MENU
CARD FORMAT
To record or edit, turn off the unit and un-protect the SD card.
The SD card is full during recording.
Save the song and turn the unit off and then on, and perform track edit
again.
Replace the batteries with new ones or use a PS-P520 AC adaptor (sold
separately).
Replace the batteries with new ones or use a PS-P520 AC adaptor (sold
separately).
Use an SD card larger than 512 MB.
Even if the card has enough remaining memory space, this error may
occur when you record a long song or edit a lot.
You may be able to continue the work if you clear the history ("Erasing
the operation history" on page 51.) which may increase the open work
memory.
You may also be able to continue work by turning the unit off and then on
again,which may increas the open work memory.
If any of these errors occur, turn the the unit power OFF and restart it.
If these error message continue to appear, please contact a TEAC Repair
Center.
Meaning and remedy
.