Setting The Recording Level Manually - Tascam DR-03 Owner's Manual

4 – Recording
or the sound source itself has low volume, set
the switch to
HIGH
When the
REC LEVEL
or , the unit automatically adjusts the
HIGH
recording level for optimal recording, so you
cannot use the
Â
adjust the recording level.

Setting the recording level manually

1 Set the
REC LEVEL
panel to .
MANUAL
2 Press the key to put the unit into
REC
recording standby. The recording indicator
blinks and the recording screen appears.
52
TASCAM DR-03
.
switch is set to
LOW
/ keys to manually
¯
switch on the right side
3 Use the and
 ¯
input level. The input level is shown at the
bottom of the display.
NOTE
ª
• Press the STOP key to end recording standby.
• When in recording standby and during record-
ing, even if the SPEAKER setting is set to ON, no
sound is output from the built-in speaker. If you
want to adjust the level or record while monitor-
ing the sounds, connect headphones to the unit's
REC indicator
keys to adjust the