Setting The Mic Input Functions - Tascam DR-07 Owner's Manual

8–Recording
MIC
Sets the input source as the built-in microphone
when no microphone cable is connected to the
jack (stereo mini-jack). When a microphone
IN
cable is connected to the
microphone signal becomes the input source.
If you select , you should also set the
MIC
input functions. (See "Setting the MIC input func-
tions" below.)
LINE
Sets the source as the line level signal input to the
right side panel
LINE IN
CAUTION
Use headphones to monitor when you are
recording with a microphone. If you use
speakers to monitor, the sound output from
the speakers may also be recorded, causing a
poor recording and even feedback.
50
TASCAM DR-07
MIC
jack, the input
MIC IN
jack (stereo mini-jack).
NOTE
The input source is the recording source when
recording.

Setting the MIC input functions

After selecting as the
MIC
µ key to highlight
INPUT
right to open the Input Setting screen.
MIC
This screen has the following settings. Among
these, , is only effective to
POWER
item, press the
INPUT
, then turn the wheel
. All the
MIC IN