Creating New Tracks While Continuing To Record; Various Recording Settings; Adjusting The Balance Of Microphones; Recording In Monaural - Tascam BB-800 Owner's Manual

Portable cd/sd recorder
Table of Contents

Advertisement

Recording level meters
21
The input signal levels of the selected inputs appear as
separate left (L) and right (R) channels. The right end
of a meter stays lit for a while if the signal level is too
high.
File number
31
The number of the file currently being recorded is
shown.
Elapsed recording time
41
The elapsed time of the track being recorded opens in
hours: minutes: seconds.
Remaining recording time
51
The remaining time available for recording on the
medium is shown in hours: minutes: seconds.
Current function of the F1 key
61
The current function of the
Recording screen, pressing this key divides the file
during recording.
Creating new tracks while continuing to
record
Press the
key during recording to create a new track at
F1
that instant and continue recording without pause.
CAUTION
You cannot divide a track during recording in the
following circumstances.
If the remaining recordable time is four seconds or
less
If only four seconds or less have passed since starting
recording
If only four seconds or less have passed since dividing
the track previously
If 99 tracks have already been recorded to the CD
If 99 tracks have already been recorded in the
selected folder on the SD card
When recording to an SD card, if the total number of
files and folders on the SD card is already 999

Various recording settings

Adjusting the balance of microphones

1 Press the
key to open the BALANCE
BALANCE
screen.
key is shown. On the
F1
4 – Recording
2 Use the
[
/
] keys to select the MIC L/R
CURSOR
§
item.
3 Use the
DATA
wheel to adjust the microphone bal-
ance.
The range is L50 – C (center) – R50.
NOTE
This setting affects both the built-in microphones and
the external microphones.
Press the F1 key to restore the balance to the center.

Recording in monaural

You can mix the left and right input signals and record in
monaural (mono).
Turn this function ON when, for example, you are only
using one external microphone.
1 Press the
key to open the INPUT screen.
INPUT
2 Use the
[
/
] keys to select the MONO
CURSOR
§
MIX item.
3 Use the
wheel to set it to ON.
DATA
TASCAM BB-1000CD/BB-800
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bb-1000cd

Table of Contents