Selecting Wireless Network Settings From The Control Panel - Epson XP-970 User Manual

Selecting Wireless Network Settings from the Control Panel

Downloaded from ManualsNet.com search engine
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software by downloading it from the Epson website. The installer program guides you
through network setup.
Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not
responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your network data and settings.
1. Press the home icon, if necessary.
2. Select the icon.
You see a screen like this:
3. Select Wi-Fi (Recommended). (If the product is already installed on a wired network, select Router.
4. Select Start Setup or Change Settings. (If the product is already installed on a wired network,
select Change to Wi-Fi connection and select Yes to confirm.
5. Select Wi-Fi Setup Wizard.
6. Select the name of your wireless network or select Enter Manually to enter the name manually. Use
the displayed keyboard to enter your network name.
46