Figure 52. Open the latch and remove the EDP cable
Go to
https://support.lenovo.com/partslookup
replacement part:
EDP cable
Remove the microphone rubbers
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the upper case assembly (for AMD UMA models)" on page 50
"Remove the upper case assembly (for Intel DIS models)" on page 52
"Remove the hinge cover" on page 55
"Remove the strip cover (for touch models)" on page 55
"Remove the LCD bezel (for non-touch models)" on page 57
"Remove the LCD panel (for touch models)" on page 58
"Remove the LCD panel (for non-touch models)" on page 59
Step 1.
Remove the microphone rubbers from the camera board.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
63