Figure 54. Disconnect the camera cable and remove the camera board
Go to
https://support.lenovo.com/partslookup
replacement part:
Camera board
Remove the camera cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the upper case assembly (for AMD UMA models)" on page 50
"Remove the upper case assembly (for Intel DIS models)" on page 52
"Remove the hinge cover" on page 55
"Remove the strip cover (for touch models)" on page 55
"Remove the LCD bezel (for non-touch models)" on page 57
"Remove the LCD panel (for touch models)" on page 58
"Remove the LCD panel (for non-touch models)" on page 59
Step 1.
Disconnect the camera cable and EDP cable from the camera board and remove the camera cable.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
65