Panasonic WHA1 Series User Manual page 20

■ SD memory card
Item
Support media
Supported format standard
(Note 1) Industrial or business use SD memory cards (SLC type) are recommended.
(Note 2) Check the operating temperature range of the SD memory card before use.
(Note 3)The format of the external memory should be in FAT32 or FAT.
The max number of files inside external memory depends on the type of formatting.
・FAT32 max 65535 files
・FAT max 512 files
(Note 4) Do not remove the SD memory card while the power is on.*
*Communication may be stopped. It is necessary to restart the power supply to recover.
 Cautions on handling a SD memory card
・ The data saved in the SD memory card may be lost in the following cases. We assume no
responsibility whatsoever for the lost of saved data.
When a user or third party used the SD memory card incorrectly.
(1)
When the SD memory card was affected by any static electricity or electrical noise.
(2)
When the SD memory card was removed or the power supply of the HMI unit was turned off while
(3)
data was being read, written or deleted to/from the SD memory card.
・ It is recommended to save important data in another media for backup.
 Formatting an SD memory card
Download formatting software for SD memory card on the following website.
 Website
https://www.sdcard.org/downloads/formatter/
PROGRAMMABLE DISPLAY WHA1 Advanced Model
Specifications
SD memory card, SDHC memory card (Note 1)
Conforms to SD standard. (Note2)
(Please format with a format software for SD memory cards.)
13