Table of Contents
Advertisement
2) Set the frequency of the recording
For once: Press K or L to point to
"ONCE".
For daily (Monday~Friday): Press K
or L to point to "DAILY".
For weekly: Press K or L to point
to "WEEKLY".
Then, press B.
3) Set the date
First, press K or L for the month.
Then, press B. Next, press K or
L for the day. Then, press B.
4) Set the start time
First, press K or L for the hour.
Then, press B. Next, press K or L
for the minute. Then, press B. And
then, press K or L for AM or PM. Then, press B.
5) Set the end time
Follow the instructions of
"Set the start time" to set
the end time.
6) Set the channel number
Press K or L repeatedly for the
desired channel number. Then,
press B.
If you connected the DVD/VCR COMBINATION UNIT to
a cable box or satellite box as in "DVD/VCR TO TV
CONNECTION" on page 13, select the DVD/VCR to channel 3
or 4 the same channel as RF output channel of the DVD/VCR.
Then, select the channel you want to record with the cable box
or satellite box.
Leave the cable box or satellite box on for timer recording.
7) Set the tape speed
Press K or L repeatedly for the
desired tape speed. Then, press B.
5
To set another program, repeat step [4]. To
exit, press CLEAR/C.RESET.
6
Press T-SET to set the timer.
¡
The TIMER REC light on the DVD/VCR COMBI-
NATION UNIT comes on. TIMER RECORDING
WILL NOT BE ACTIVATED UNLESS YOU
PRESS T-SET.
HINTS FOR TIMER
RECORDING
¡
If there is a power failure or the VCR is unplugged
for more than 30 seconds, the clock setting and all
timer settings will be lost.
¡
If a tape ends during TIMER RECORDING, the
VCR will stop, eject the tape, and switch to the DVD
mode automatically as the TIMER REC light blinks.
(If the DVD power is off, the VCR will become
PROGRAM NUMBER 4
ONCE
STANDBY status).
DAILY
WEEKLY
¡
If a tape is not in the VCR or does not have a safety tab,
the TIMER REC light flashes and timer recording will
not operate. Please insert a recordable tape.
¡
When all timer recordings are finished, the TIMER
ONE TIME PROGRAM
REC light will flash.
PROGRAM NUMBER 4
DATE
- - / - -
START TIME - - : - -
- -
To use the VCR again as usual, press T-SET to disable the
END
TIME - - : - -
- -
CHANNEL
- -
flashing TIMER REC light, then press VCR/TV to select the
REC SPEED - -
VCR position. Select either VCR or DVD mode, then contin-
ue with the other features as described in this manual.
ONE TIME PROGRAM
¡
When timer recordings are set, the TIMER REC light
PROGRAM NUMBER 4
DATE
05 /12 MON
will come on. To use the VCR as usual until the time for
START TIME - - : - -
- -
END
TIME - - : - -
- -
the recording, press T-SET so that TIMER REC light
CHANNEL
- -
REC SPEED - -
disappears. Press VCR/TV to choose the VCR position.
Select either VCR or DVD mode, then continue with
the other features as described in this manual.
If you want to use the DVD player during
ONE TIME PROGRAM
a VCR timer recording or while the
PROGRAM NUMBER 4
DATE
05 /12 MON
START TIME 07: 30 PM
TIMER REC light is on or flashes.
END
TIME - - : - -
- -
CHANNEL
- -
¡
You can use the DVD player while the TIMER REC
REC SPEED - -
light is on or flashes, or during a timer recording.
Press POWER to turn on the DVD. Press DVD on the
ONE TIME PROGRAM
remote control to choose DVD mode, then continue
PROGRAM NUMBER 4
DATE
05 /12 MON
with the other DVD features as described in this man-
START TIME 07: 30 PM
END
TIME 08: 30 PM
ual. You don't have to set the TIMER off to use the
CHANNEL
- -
REC SPEED - -
DVD only.
TO STOP AN AUTOMATIC TIMER PRO-
GRAM ALREADY STARTED
Press STOP/EJECT on the DVD /VCR COMBINA-
TION UNIT.
TO CHECK, CORRECT, OR CANCEL AN
AUTOMATIC TIMER PROGRAM
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
05 /12 MON
1
START TIME 07: 30 PM
END
TIME 08: 30 PM
¡
If the DVD output mode is selected, you have to
CHANNEL
16
REC SPEED SP
switch it to the VCR mode by pressing the VCR on
SP
SLP
the remote control or the OUTPUT on the VCR.
2
3
4
¡
The details of the selected program appears on the
TV screen.
¡
Go to the digit you want to change by pressing B or
s. Then, enter correct numbers by pressing o or p.
¡
You may cancel the entire program by pressing s
while the program number flashes.
VCR
5
6
– 20 –
Press T-SET.
Select main menu by pressing MENU.
Select "TIMER PROGRAMMING" by press-
ing K or L. Then, press B.
Select the program number you want to
check by pressing K or L.
Press CLEAR/C.RESET to exit.
Press T-SET to return to timer stand-by mode.
EN
1L25
Advertisement
Table of Contents
