Hints For Automatic Timer Recording; Auto Return; Sleep Timer - Sylvania RSEC720E Owner's Manual

TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the Recording
indicator goes off.
2)Press the SETUP button on the remote control.
3)Confirm "TIMER PROGRAMMING" is pointed.
4)Press the ENTER button. The details of programs
appear on the TV screen.
5)Press the SETUP button on the remote control to
return to TV mode.
HINTS FOR AUTOMATIC
TIMER RECORDING
•
Make sure the channel you want to record is prop-
erly set in advance.
•
It is not necessary to press the RECORD button for
timer recording.
•
Recording begins automatically at the Start time.
•
The display will not be turned on when the pro-
grammed recording begins. To watch the currently
recorded TV program or to play a DVD disc, press
the POWER button to turn on the display and use
the SELECT button to choose the TV/VCR mode
or the DVD mode.
•
The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
•
If the erase-prevention tab is removed, the cassette will
be ejected when the POWER button is pressed to off.
•
If the tape runs out before the end time, the unit
will switch to the Stop mode immediately and the
tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1
Select "USER'S SET UP"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "USER'S SET UP".
Then press the ENTER button.
2
Set "AUTO RETURN" to [ON]
Press the Arrow button K or L to
point to "AUTO RETURN".
Press the ENTER button until [ON]
appears.
3
When all the timer recordings are completed, the unit
will rewind to the beginning of the recorded pro-
gram(s).
NOTE:
•
If you press the POWER button while tape is
rewinding, the Auto Return will stop.
4
Press the PLAY button.
TO CANCEL THE AUTO RETURN
MODE
TV/VCR
Repeat steps [1] to [2], select [OFF] using the
ENTER button.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
The Sleep Timer function turns off the unit without
using the POWER button after a desired period of
time.
NOTE:
•
This function does not operate during Recording
mode.
1
Press the SLEEP button on the remote control until
"SLEEP TIMER" appears.
2
TV/VCR
Press the SLEEP button until your
desired sleep time appears.
Each additional push will increase
the time by 30 minutes up to 120
minutes.
After 5 seconds, exit the Sleep Timer setting.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
TO CANCEL THE SLEEP TIMER
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
Press the SLEEP button on the remote control until
TIME SEARCH
INDEX SEARCH
"SLEEP TIMER" appears. Press the SLEEP button
until "SLEEP 0 MINUTES" appears.
– USER'S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
B AUTO RETURN [ON]
VCR AUDIO [HIFI]
TV AUDIO [STEREO]
- 34 -
Auto Return will begin
Watch the recorded program

SLEEP TIMER

Select "SLEEP TIMER"
Set sleep time
TV/VCR
SLEEP 120 MINUTES
EN
1C29