Camera Select; Record Select - Swann DVR4-Alert SW242-DAL User Manual

MAIN MENU

CAMERA SELECT

RECORD SELECT

RESOLUTION
RECORD FRAME
RECORD QUALITY
SCHEDULE SET
MISCELLANEOUS MENU
HARD DISK SET
VIDEO MODE
MOTION SET
FACTORY RESET
PRESS (UP，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
5.2 Camera Select
If a channel is disabled, the system will display "OFF" on the monitor; this
channel will not be recorded. (Refer to 5.3 Record Select)
5.3 Record Select
Manually set which channels are allowed to record.
Note: If no channels are selected, an error message will appear briefly on the
screen when record is selected. "1234" indicates all cameras are set to record.
1 2 3 4
[
1 2 3 4
EACH
25
[ Up] and [ Down]: Move the cursor
HIGH
[ SEL]: Select/modify settings
PAL
[
The DVR system can display 4
cameras at once or you can limit the
number of cameras displayed to save
HDD space.
Press [ SEL] to modify setting, or
press [CH1], [CH2], [CH3] and [CH4] to
set each channel separately.
- 6 -
Menu]: Push to enter system menu
Menu]: Press exit/previous menu
User Manual