Displaying The Control Window Of The Unit With A Web Browser - Sony VPL-VW1000ES Operating Instructions Manual

Projectors: front projector
Hide thumbs Also See for VPL-VW1000ES:
Table of Contents

Advertisement

Displaying the
Control Window of
the Unit with a Web
Browser
1
Connect the LAN cable.
LAN cable
(straight type)
(not supplied)
LAN Connector
Hub, router, etc.
CAUTION
For safety, do not connect the connector for
peripheral device wiring that might have
excessive voltage to this port. Follow the
instructions for this port.
ATTENTION
Par mesure de sécurité, ne raccordez pas le
connecteur pour le câblage de périphériques
pouvant avoir une tension excessive à ce
port. Suivez les instructions pour ce port.
VORSICHT
Aus Sicherheitsgründen nicht mit einem
Peripheriegerät-Anschluss verbinden, der zu
starke Spannung für diese Buchse haben
könnte. Folgen Sie den Anweisungen für
diese Buchse.
2
Set the network settings for the
unit using "Network Setting" on
the Installation
page 58).
3
Start a web browser on the
computer, enter the following in
the address field, then press the
Enter key on your computer.
http://xxx.xxx.xxx.xxx
menu (1
(xxx.xxx.xxx.xxx: IP address for the
unit)
You can confirm the IP address of the
unit under "Network Setting" on the
Installation
menu.
The following window appears in the
Web browser:
Once you make the network settings,
you can open the Control window only
by performing step 3 of this procedure.
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents