Charging The 3D Glasses; Usb Charging Ac Power Adaptor; Ac Power Cord For Usb Charging Ac Power Adaptor - Sony VPL-VW1000ES Operating Instructions Manual

Charging the 3D Glasses

Use the provided USB charging AC power
adaptor to charge your 3D glasses.
Caution
Connect the USB charging cable supplied
with the unit, to the supplied USB charging
AC power adaptor only.
Using any other connector may cause fire, a
rise in temperature or damage to the cable
and glasses.
1
Turn off the power of the 3D
glasses.
2
Open the 3D glasses cover and
connect the USB charging cable
supplied with the unit.
Open the cover.
Supplied USB cable
3
Connect the USB cable to the
USB connector of the supplied
USB charging AC power
adaptor.
Supplied USB charging AC power adaptor
4
Connect the AC power cord for

USB charging AC power adaptor

to the supplied USB charging
AC power adaptor.
AC power cord for USB
charging AC power adaptor
5
Plug the AC power cord for USB
charging AC power adaptor into
an AC outlet.
Charging starts. The LED indicator on
the 3D glasses lights up in orange while
the glasses are being charged.
(After charging finishes, the LED
indicator turns off.)
Precautions about USB charging
AC power adaptor
Installation
Do not place the USB charging AC power
adaptor in a location where it is:
• Subject to extreme high temperature (E.g.,
in a car with its windows closed)
• Subject to direct sunlight or near a heat
source
• Subject to mechanical vibration or shock
Operation
• To prevent damage, be careful not to drop
or otherwise cause a mechanical shock to
the unit.
• After using, disconnect the unit from the
AC outlet and the equipment.
• Disconnect the unit from the AC outlet by
pulling on the plug. Do not pull on the
cord.
• To avoid short-circuiting, do not allow the
terminals of the USB charging AC power
adaptor or connector to touch any metal
object.
31