Setup Menu - Sony VPL-VW1000ES Operating Instructions Manual

Setup Menu

The Setup menu is used to change the factory preset settings, etc.
Status
Language
Menu Position
Cooling Setting
Standby Mode
Power Saving
50
Sets whether or not the on-screen display is displayed.
Set to "Off" to turn off the on-screen displays except for certain
menus, message when turning off the power, and warning messages.
Selects the language used in the menu and on-screen displays.
Available languages are: English, Dutch, French, Italian, German,
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
Chinese (Simplified Chinese), Chinese (Traditional Chinese),
Korean, Thai, and Arabic.
You can change the position to display the menu on the screen.
Bottom Left: Displays the menu on the bottom left area of the
screen.
Center: Displays the menu on the center of the screen.
Sets the unit to operate at the prevailing atmospheric pressure.
High: Use this setting when using the unit at an altitude of 1,500 m
or higher.
Standard: Use this setting when using the unit at normal altitudes.
Tip
When this item is set to "High," the fan noise becomes slightly
louder since the number of fan rotations increases.
You can select the power consumption in standby.
Standard: The power consumption in standby mode is normalized.
Low: The power consumption in standby mode is lowered.
Tip
When this item is set to "Low," the "PJ Auto Power On" function is
disabled (The function is set to "Off" and does not appear in the
menu).
Sets the power saving mode.
When set to "On," the unit goes into power saving mode if no signal
is input for 10 minutes. At that time, the ON/STANDBY indicator
lights in orange, then the screen becomes dark. In power saving
mode, the power saving mode is canceled if a signal is input or any
button on the unit or the remote control is pressed. If you do not
want to set the unit to power saving mode, select "Off."