Jog Wheel Sensitivity; Factory Settings; Fader Start - Stanton C.314 User Manual

SAVING PRESETS AND CUE POINTS
This unit will retain the setting you have made for most of the functions
even if you unplug it. These functions include Pitch Range, Pitch Lock, Key
Lock, effects, Vinyl and Touch Rewind, Single/Continuous, Auto BPM, and
Repeat.
In addition, the unit will save and recall cue points and loops saved to the
four pads for up to 500 CD's.
• To save cue points, loops, and setting, press and hold the SAVE button
until the display reads SAVING
For example, if everytime you turn on the unit you want it to load up in vinyl
mode, with the pitch range set to 16%, single mode, and auto cue on, turn
on all those functions and save.
WARNING: Do not power off the unit right after saving. You must wait
at least 3 seconds in order for the new presets / cue points to be
stored in memory.

JOG WHEEL SENSITIVITY

The touch sensitivity of the jog wheel can be adjusted to fit the needs
and feel of different users. When adjusting the sensitivity, be con-
scious of extreme settings which may affect your performance.
Setting the sensitivity too high would engage the touch sensitivity
with the hand just above the wheel. Setting the sensitivity too low
may not engage the touch even while pressing firmly on the wheel.
• To adjust the jog wheel touch sensitivity, press and hold the PITCH
BEND button while turning either encoder. Release PITCH BEND
when done. Wait at least 3 seconds before powering off the unit.

FACTORY SETTINGS

To return to factory settings...
• Power off the unit
• Press and hold the CLEAR button as you power up the unit,
• The display will read clearALL, release the CLEAR button
WARNING: Restoring factory settings will delete cue point memory.

FADER START

By connecting the CD player to a mixing board that has the fader start fea-
ture, the crossfader will engage playback or cue mode depending on its
location. If the CD player is connected to the left side of the crossfader,
playback will start once the fader is moved from the left most position
towards the right. The CD player will re-cue itself when the crossfader is
brought back to the left most position. Two CD players can be hooked up
in this fashion to work on both sides of the crossfader.
RELAY PLAY USING TWO PLAYERS
When both CD players are connected to each other via their FADER
START / RELAY jacks, the players can work in unison by playing tracks
one after another from both units.
• Set both players to single play mode (the SINGLE indicator will be illu-
minated in the LCD displays).
• Begin playback on the first player.
• When the first track ends, playback will automatically start on the second
player and the first player will automatically enter standby mode.
• When the track on the second player ends, the first player will play the
next track. The players will continue to perform continuous relay play
until stopped or until the last track is played.
• You can set a cue point on the standby player to jump directly to that
point.
SLEEP
The C.314 will automatically go into sleep mode after 15 minutes of inac-
tivity. Press either the Play or Cue button to wake it up.
12