Lcd Display - Stanton C.314 User Manual

LCD DISPLAY

42. TRACK – Indicates the current track selected or being played.
43. CD/MP3 – Indicates whether the current disc is a standard audio disc
or an MP3 disc.
44. PITCH VALUE – Shows the percentage of the pitch slider.
45. LOCK - Shows when Pitch Lock and/or Key Lock are active.
46. SINGLE – Controlled by the CTN/SGL button, this indicates when the
unit is set to play just one track at a time. When this is not illuminat-
ed, the CD will play continuously through all tracks.
47. A.BPM – Indicates when Auto BPM is active. To activate, press and
hold the TAP button.
48. A.CUE – Indicates when Auto Cue is active. To activate Auto Cue,
press and hold the SGL/CTN button
49. LOOP – Indicates when the CD is in loop mode.
50. RELOOP – Indicates when there is a previously set loop, and that the
loop is ready to be played again.
51. EFFECT – Indicates when an effect is active.
52. PLAY – Indicates when the unit is currently playing a CD.
53. HAND – Indicates when the touch sensitive surface of the jog wheel
is active.
54. PAUSE – Indicates the unit is in CUE or PAUSE mode.
55. CUE – Indicates the unit is at a cue point and is ready to play.
56. WHEEL INDICATOR – This is a visual representation of a vinyl mark-
er, which is traditionally used to mark the location of a certain sound
or cue point on a vinyl record. Here, it indicates the play position,
rotates during playback in either direction, and stops during cue or
pause mode. It also indicates the speed of the forward and reverse
search operation.
57. ANTI SHOCK AND BUFFER INDICATOR – Indicates the current sta-
tus of the buffer memory. This is represented on the display by a
bucket being filled or emptied. The bucket itself represents the
instant start function (which works by buffer memory). If the bucket is
flashing, the instant start is not available. Each bar within the bucket
represents 2 seconds of anti shock protection. There is up to 10 sec-
onds of anti shock protection available. It is recommended to let the
bucket fill up before using the jog wheel in vinyl mode.
58. X/Y/BPM – Indicates whether PARAMETER (#59) is displaying the
BPM or effect parameters
59. PARAMETER – Shows the current BPM count, or tempo of the
music. Also shows the effects TIME and RATIO parameters while
they are being adjusted.
60. TIME BAR – Shows a proportionate visual representation of the time
remaining or time elapsed.
61. TIME DISPLAY – Displays the time of track(s) currently selected in
increments of Minutes, Seconds, and Frames.
62. TEXT – The text portion of the display (the bottom row) is mainly
used to display MP3 file names or CD text information. It is also used
to display various messages, such as effects parameter settings and
more. See operating instructions for further explanation.
63. ELAPSED / TOTAL / REMAIN – Indicates whether the time shown on
the display refers to total remaining time or track remaining time. If
either of these are not illuminated, this indicates elapsed track time.
7