Brewer Setup - Fetco Extractor Plus CBS-1231 Users Manual And Operator Instructions

Brewer Setup

NOTE-Assemble legs after unpacking the brewer and before connection to utilities
1) attach legs for 3 Liter/ 1 Gallon dispensing
STANDARD WITH UNIT
1" legs -
Attach this length for
3 Liter air pot configuration
Legs are sent from factory inside brew basket. Attach legs before installing
2) Adjust dispenser locator for either 3 Liter / 1 Gallon dispensing
Layout of the brewer
Operation and service
Brew basket
Keypad for brewer operation
Hot Water Faucet
ON/OFF Switch
Air pot or Dispenser Locator
(Two for twin side)
SELECT brewer model
From SERVICE MENU (Page 9) go to position F3
Select model and SAVE and EXIT (Page 11)
Be certain to SAVE new settings
Go to fetco.com for the latest versions of all information
Set Dispenser Locator
 Shown with 1 gallon dispenser
locator
-(User option)
Shown with 3 liter air pot Locator

-(Factory installed)
Page 17
NOT INCLUDED. Purchase separately
2-1/2" legs -
Attach this length for
1 Gallon dispenser or 3 liter air pot.
Part number 1073.00016.00
3 required for CBS-1232
4 required for CBS-1231
For installing brewer
Power
Switch
Electrical
Connection
USB
Connection
User Guide & Operator instructions
Water
Supply
Connection
P211e0November 2021