Editing Your Voice Commands - Sony Ericsson K700c Owner's Manual

To reject a call using voice
commands
When the phone rings, say "Busy".
The call is rejected. The caller is diverted to
voicemail, if activated, or hears a busy tone.

Editing your voice commands

You can keep all your voice commands up to date
by re-recording them or deleting the ones you do
not use. You can also edit a voice command for a
phone number in the phonebook. Select the contact
you want to edit a voice command for
} View &
edit. Scroll to the relevant tab and edit
your voice command.
To re-record a voice command
1
} Settings } General
the
} Voice dialling } Edit
2
Select a voice command
} Replace voice.
3
Lift the phone to your ear, wait for the tone and
say the command.
This is the Internet version of the user's guide. © Print only for private use.
} More
} Voice control
tab
names.
} More
Tips when recording and using voice
commands
If your phone cannot detect speech, one of the
following might have happened:
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it as you
do during a call.
• The voice command was too short – it should
be around one second long and more than one
syllable.
• You spoke too late or too soon – speak
immediately after the tone.
• You did not record the voice command when the
handsfree was attached – for voice control with
a handsfree kit, record when the handsfree is
attached.
• You used another intonation – use the same
intonation as you did when recording the voice
command.
Calling
33