Receiving Ssb And Cw Transmissions - Sony CF-SW07 Operating Instructions Manual

Receiving SSB and CW
Transmissions
You can receive SSB (Single Side Band) and CW (Continuous Wave)
transmissions with the built-in BFO circuit.
FM/AM
1
Press POWER ON/OFF to turn on the radio.
2
Press FM/AM and select AM.
3
Press SSB to select USB or LSB/CW.
Each time SSB is pressed, the display
changes as follows:
(Normal mode)
4
Tune in to the desired station.
For tuning methods, see "Various ways of reception", pages 16 to
29.
Tip
For more on SSB and CW, refer to "Tips on radio waves", page 50.
Notes
• The USB or the LSB/CW mode cannot be preset to memory. You can
tune in to stations in 0.1 kHz steps in the USB or the LSB/CW mode,
but the frequency digit below the decimal point is ignored when
memorized.
• If a preset AM frequency is recalled during the USB or the LSB/CW
mode, the mode setting remains active and the frequency is received in
the respective mode.
GB
30
Listening to the radio
ABC DEF GHI
1 2
FM/
AM
JKL MNO PQR
4 5
AM BAND
STU VWX YZ
LOCAL/
7 8
WORLD
<>
/ DISPLAY
LABEL EDIT
0
EXE
DIRECT
TIMERSTANDBY/ TIME SET
STANDBY TIME SET TIME DIFF
a b
STANDBY MEMORY
SW STATION CALL
MY DW VOA
USB LSB/CW
POWER
ON/
3
SYNC
OFF
6 SSB SLEEP
DST
9 ERASE
LIGHT
TIME SET
ENTER
JOG/
TUNE/
SCAN˚
BBC OTH
POWER
ON/OFF
SSB