Table of Contents
Advertisement
H9779ED(EN).fm Page 14 Monday, October 25, 2004 4:21 PM
OTR (One Touch Recording)
This function enables you to set the duration of a recording
REC/OTR
simply by pressing
.
1) Follow steps
1)
3)
to
in "Viewing and Recording the Same
Programme".
2) Press
REC/OTR
repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
I [0:30]
I
I[1:00]...
(Normal
(OTR:
recording)
30 minutes)
Recording stops when 0:00 is reached.
• To check time remaining during an OTR
Press
DISPLAY
.
• To change the recording length during an OTR
Press
REC/OTR
repeatedly until the desired length appears.
• To stop an OTR before recording is finished
Press
STOP
.
• To cancel the OTR but continue recording
REC/OTR
Press
repeatedly until "I" appears without the
recording length.
• If there is no timer recording set after an OTR, this unit
switches to DVD mode and the TIMER REC indicator
flashes because the VCR is still on standby for timer
T-SET
recordings. Press
on the remote control or
STOP/EJECT
on the front panel to cancel timer standby,
VCR
then press
to use the VCR again.
If there is a timer recording set after an OTR, this unit
switches to DVD mode and the TIMER REC indicator
lights up, indicating that this unit is on timer standby. Press
T-SET
on the remote control or
panel to cancel timer standby, then press
VCR again.
Auto Repeat Playback
The DVD/VCR has an auto repeat function that allows you to
repeat a tape indefinitely without touching
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1) Press
VCR
MENU
, then
.
2) Press
or
to select "SET UP", then press
K
L
3) Press
or
to select "AUTO REPEAT".
K
L
4) Press
so that "ON" appears next to "AUTO REPEAT"
B
on the TV screen.
When in Stop mode, Auto Repeat mode will start
automatically.
If the on-screen menu still remains, press
PLAY
then press
.
Note:
Once you select the Auto Repeat mode, it stays in effect
even after you turn off the DVD/VCR.
To Stop Playback
STOP
Press
.
To Exit the Auto Repeat Mode
Repeat steps
1)
to
3)
. Then, press
"OFF" will appear next to "AUTO REPEAT" on the TV
screen. Press
I[7:30]
I[8:00]
Picture Select
This function enables you to select the picture quality of a
tape.
• Use the remote control for this procedure.
1) Press
2) Press
3) Press
4) Press
5) Press
Note:
STOP/EJECT
on the front
VCR
to use the
PLAY
.
.
B
MENU
to exit,
Automatic Operations
Automatic Rewind, Eject
When the end of a tape is reached during recording, playback,
or fast-forward, the tape will automatically rewind to the
beginning. After that, the DVD/VCR will eject the tape.
• The tape will not auto-rewind during timer recording or
.
B
Tape Eject
A tape can be ejected with the DVD/VCR power on or off
(but the DVD/VCR must be plugged in).
• If a timer recording is set, press
14
MENU
to exit.
MENU
TIMER
SET UP
INITIAL
VCR
MENU
, then
.
or
to select "SET UP", then press
K
L
or
to select "PICTURE".
K
L
until the desired mode (NORMAL, SOFT, or
B
SHARP) is indicated on the TV screen.
MENU
to exit.
Once you select the Picture Select mode, it stays in
effect even after you turn off the DVD/VCR.
MENU
TIMER
SET UP
INITIAL
One Touch Recording.
STOP/EJECT
a tape.
MENU
TIMER
SET UP
INITIAL
SET UP
AUTO RETURN
[ ON ]
AUTO REPEAT
[ ON ]
[ NORMAL ]
PICTURE
.
B
MENU
TIMER
SET UP
INITIAL
SET UP
[ ON ]
AUTO RETURN
[ ON ]
AUTO REPEAT
[ NORMAL ]
PICTURE
twice to eject
EN
Advertisement
Table of Contents
