Transmission - Ducati PANIGALE V45 2021 Owner's Manual

Type: Stylema monobloc
(ABS Cornering EVO).
Number of pistons per calliper: 4
Friction material: BRM10H.
Master cylinder type: PR16/21 S, self-bleeding.
Front brake master cylinder lever DBC: 21 mm (0.83
in).
Front brake master cylinder diameter: 16 mm (0.63
in).
REAR
With fixed drilled stainless steel disc.
Disc diameter: 245 mm (9.6 in).
Brake disc thickness: 5 mm (0.2 in).
Disc thickness maximum wear: 4.5 mm (0.18 in).
Braking surface: 219 sq. cm (33.94 in
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO.
Number of pistons per calliper: 2.
Cornering ABS EVO.
Friction material: TOSHIBA TT 2172 HH.
Master cylinder type: PS 13.
Master cylinder piston diameter: 13 mm (0.51 in).
(R)
M4.30, radial mount
2
).
Attention
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.

Transmission

Hydraulically-controlled slipper/self-servo wet
multiplate clutch controlled by the lever on left-
hand side of the handlebar.
Drive is transmitted from engine to gearbox primary
shaft via spur gears.
Primary drive: 30/54.
Drive ratio: 1.80:1.
6-gear gearbox with Ducati Quick Shift (DQS) up/
down EVO2, gear change pedal on left side of
motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
16/41
Total gear ratios:
st
1 36/15
nd
2 34/17
rd
3 33/19
th
4 32/21
th
5 30/22
283