Setting Menu - DRL
This function allows setting the status of the DRL in
automatic or manual mode. Available only if daytime
running lights (DRL) are present.
Enter the Setting menu.
●
Use buttons (1) and (2) to select item "DRL" and
●
press the ENTER button (3).
"Auto" and "Manual" are displayed in the middle.
While the currently set mode is shown on the right.
Use buttons (1) and (2) to scroll and select the desired
mode. Press ENTER (3) to confirm.
To exit the menu and return to the previous screen,
select the "Back" item and press the ENTER button
(3).
Note
In case of battery disconnection, the "Auto"
mode is automatically set.
Lap
Backlight
DRL
Date and Time
Tyre calibration
Back
Auto
DRL
... ...
Manual
Back
1
2
3
Fig 142
Auto
Fig 143
203