Ducati PANIGALE V45 2021 Owner's Manual page 21

Search and pairing of a new device
To perform the "Pairing" procedure of one or more
Bluetooth devices it is necessary to set the device to
ensure it can be detected by the control unit, so turn
device on and make it visible to other devices.
A Bluetooth device in visible mode transmits a
wireless signal allowing it to be detected by other
devices. This function is called pairing mode.
The motorcycle can be equipped with a Bluetooth
control unit that works as a hub between the various
supported electronic devices relying on a Bluetooth
communication interface.
Note
Maximum of 2 smartphones, 1 rider earphone, 1
passenger earphone, 1 satellite navigator can be
paired up.
Attention
Smartphone and Bluetooth Headset device
manufacturers may incorporate certain changes
within the standard protocols over the course of the
lifecycle of the device (Smartphones and
Earphones).
20
Attention
These changes are outside the control of
Ducati and may result in Smartphone and Bluetooth
Headset devices functionality becoming impaired
(sharing Music, multimedia player, etc.) and may
equally affect some types of Smartphones
(depending on supported Bluetooth profiles). This is
why Ducati cannot guarantee multimedia player
proper operation for:
1) the entire range of headphones and
Smartphones available on the market;
2) Smartphones that do not support the required
Bluetooth profiles.
Check that your Smartphone supports the following
profiles:
MAP profile: for a correct display of SMS and
●
MMS notifications;
PBAP profile: for a correct display of the
●
Smartphone contact list.