Omron SYSMAC-SE2 Series Practices Manual page 33

2 Target Data and Preconditions for the Sysmac Studio/EPLAN Electric P8 Connector Function
Preconditions for Importing a CJ-series Unit Configuration
All of the following conditions must be met to import a CJ-series Unit configuration with the Sysmac
Studio.
• In an EPLAN Electric P8 project, the CJ-series Unit configuration consists of only Units supported by
the connector function. Refer to 2-1-4 CJ-series Units on page 2-6 for the CJ-series Unit models
supported by the connector function.
• In the EPLAN Electric P8 project, the component data and project settings for the CJ-series Units
meet the rules described in 3-2-4 CJ-series Units on page 3-6 and 3-3-4 CJ-series Units on page
3-12.
Preconditions for Importing Device Variables
All of the following conditions must be met to import device variables in the Sysmac Studio.
• In an EPLAN Electric P8 project, models and I/O ports that support the connector function for device
variables are used. Refer to 2-1-5 Device Variables on page 2-7 for details.
• In the EPLAN Electric P8 project, component data and project settings for the device variables meet
the rules described in 3-2-5 Device Variables on page 3-7 and 3-3-5 Device Variables on page
3-14.
Sysmac Studio Electrical CAD Connector Function Practices Guide for AutomationML Import (EPLAN Electric P8) (P156)
2
2-9