Stihl MH 600 Instruction Manual page 34

English
► Secure cables (16) by bending the cable
clip (17) on the tiller.
6.5 Attaching the Transport Handle
► Hold transport handle (1) against console (2)
so the bores align.
► Fit spring washers (3) and washers (4) on
bolts (5).
► Insert bolts (5) together with spring wash‐
ers (3) and washers (4).
► Tighten bolts (5) to 22 Nm to 28 Nm.
Transport handle (1) is locked in place.
6.6 Attaching the Guard and Cov‐
ers
6.6.1 Attaching the Guard
► Insert bolt (1) through holders (2), aligning the
bores.
► Place washer (3) on bolt (1).
► Screw on nut (4) and tighten.
34
► Insert bolt (5) through holder (6), aligning the
bores.
► Place washer (3) on bolt (5).
► Screw on nut (4) and tighten.
► Insert bolts (7) through guard plate (8).
► Place washers (3) on bolts (7).
► Screw on nuts (4) and tighten.
6.6.2 Attaching the Covers
► Hook cover (1) onto bracket (2).
6 Assembling the Cultivator
0478-404-9807-B