Kyocera MA2001w Operation Manual page 9

SAFETY OF LASER BEAM (USA)
1. Safety of laser beam
This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards
established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product
is safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing
and sealed within the external covers, never permits the laser beam to escape.
2. The CDRH Act
A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological Health
(CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S.
without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates
compliance with the CDRH regulations and must be attached to laser products marketed in the United States. On
this machine, the label is on the rear.
MAxxxxx
3. Maintenance
For safety of the service personnel, follow the maintenance instructions in the other section of this manual.
1-5