Kyocera MA2001w Operation Manual page 77

Device Defaults Tab
No. Item
1 Power off timer
2 Auto sleep
3 Units
4 Print density
5 Panel options
6 Auto error clear
1
3
4
5
8
11
12
Description
Select the length of time before the machine shuts off automatically when not in use.
The default preset time is 3 days.
Value: 1 to 6 hours, 9 hours, 12 hours, 1 day to 1 week
• USB is connected: Selects whether or not to turn the power off automatically
when a USB is connected.
• Network is connected: Selects whether or not to turn the power off automatically
when a Network is connected.
Set the sleep timer for the machine to go into sleep mode when not in use. The default
preset time is 1 minute.
Value: 1 to 60 minutes (1 minute increments)
Select Inches or Millimeters for the unit for paper dimensions.
Adjust density using 5 levels.
Value: Light, Medium light, Normal, Medium dark, Dark
Opens Panel options screen.
Enable auto error clear. If an error occurs during processing, processing stops to wait
for the next step to be taken by the user. In the auto error clear mode, automatically
clear the error after a set amount of time elapses.
If you select On for auto error clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (every 5 seconds)
• Default screen: Select the screen appearing right after
start-up (default screen).
Note To enable the change immediately, turn the
machine OFF and then ON. Otherwise wait until the
machine once enters the sleep and then resumes.
• Reset panel: If no jobs are run for a certain period of
time, automatically reset settings and return to the
default setting. If you select On for Reset panel, set the
amount of time to wait before Reset panel.
3-53
Preparation
2
6
7
9
10
13
14