Kyocera MA2001w Operation Manual page 148

Message displayed in
Error Code KYOCERA Client Tool
and Status Monitor*
Memory overflow
E-0012
Paper size error
E-0014
—
E-0015
— Not connected.
E-0016
—
E-0019
E-0020
Paper jam
J-0511
Add paper
PF
— Toner is running out.
* Events for which the Status Monitor provides notification can be set in the Configuration. Refer to Configuration
on page 3-51.
Meaning
Unable to continue the job as the
memory is used up.
The paper size in the paper source
is different from the printer driver or
KYOCERA Client Tool setting.
The USB cable is not connected.
The PC is powered off.
Cannot find KYOCERA Client Tool. Press [Stop] (
The USB cable is not connected.
The machine is powered off.
Cannot find the appropriate driver.
An error occurs in image
processing by the side of PC.
The machine cannot run this
program due to unusable original
size is registered in the program.
The toner cartridge is not install
correctly.
A paper jam has occurred.
A paper jam has occurred in the
cassette.
There is no paper in the paper
source.
It is almost time to replace the
toner cartridge.
9-8
Remedy
Change the print resolution from Fast
1200 to 600 dpi. Refer to Printer Driver
User Guide.
Load the proper size of paper in the
paper source.
Press [Stop] ( ) and connect the USB
cable.
Press [Stop] ( ) and turn the PC power
on.
) and open KYOCERA
Client Tool.
Connect the USB cable.
Turn the machine power on.
Install the appropriate driver.
Press [Stop] ( ) and change the
program settings.
Check the toner cartridge.
Refer to Clearing Paper Jams on
page 9-9 and remove the jammed paper.
Refer to Clearing Paper Jams on
page 9-9 and remove the jammed paper.
Load paper into the paper source.
Obtain a new toner cartridge.
Troubleshooting