Festool TPC 18/4 Original Instructions Manual page 14

English
KC 13
2
1
10.3 Angle attachment [9]
Drilling and screwdriving at right angles to the
power tool (available as an accessory depend­
ing on the model).
AN-UNI
3
2
10.4 Tool holder in the drill spindle [10]
Bits can be inserted directly into the hexagon
socket holder of the drill spindle.
14
klick
3
4
klick
klick
klick
1
8
10.5 Eccentric adapter [11]
Screwdriving close to edges with bits according
to ISO 1173 (available as an accessory depend­
ing on the model).
EX-UNI
3
10.6 Depth stop [12]
The depth stop (available as an accessory de­
9 pending on the model) allows a screw to be
tightened with a defined depth. You can set the
dimension to which the screwhead is to project
over the workpiece surface, or to which it is to
be inserted.
the screw-in depth by 0.004" (0.1 mm).
To unscrew a screw, the A/B sleeve must first
be removed.
2
1
Depth adjustment
Firmly set the required screw-
in depth by turning the hous­
ing [12-1]. Each catch alters
10
11