Pioneer AVIC-Z1000DAB Operation Manual page 60

Menu Item
[Connection]
[Auto Connect]
[On] [Off]
[Visibility]
[On] [Off]
[PIN Code Input]
[Device Information]
[Bluetooth Memory Clear]
Hands-free phoning
To use this function you need to connect your mobile phone to this product via
Bluetooth in advance (page 59).
CAUTION
For your safety, avoid talking on the phone as much as possible while driving.
NOTE
When the system language is set to Russian,
the key repeatedly until the desired character appears.
Description
Connect, disconnect, or delete registered Bluetooth device
manually.
Touch to delete registered device.
To connect a registered Bluetooth device manually, touch
the name of the device.
To disconnect the device, touch the name of the connected
device in the list.
You can also connect or disconnect the registered
Bluetooth device by touching
When there is no device available for connection in the list,
the unit starts to search for available devices, then displays
them in the list.
NOTE
Connect the Bluetooth device manually in the following cases:
• Two or more Bluetooth devices are registered, and you want to
manually select the device to be used.
• You want to reconnect a disconnected Bluetooth device.
• Connection cannot be established automatically for some
reason.
Select [On] to connect the last connected Bluetooth device
automatically.
Select [On] to make this product visible to the other device.
Change the PIN code for Bluetooth connection.
The default PIN code is "0000".
1
Touch [0] to [9] to input the pin code (up to 8 digits).
2
Touch .
Displaying the device name and address of this product.
Touch [Clear] then [OK] to clear the Bluetooth memory.
ABC appears. If you want to change the character, touch
- 60 -
.