Pioneer AVIC-Z1000DAB Operation Manual page 122

Menu Item
[Time Alignment]
[On] [Off]
Listening position*1*2
[Off] [Front Left] [Front
Right] [Front] [All]
Standard Mode*3*4
[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer]
Network Mode*3*4
[High Left] [High Right]
[Mid Left] [Mid Right]
[Subwoofer]
Distance
[0] to [350]
[Save Settings]
[Load Settings]
[ASL]
[Bass Boost]
[0] to [6]
[Rear Speaker Output]
[Rear] [Subwoofer]
[Loudness]
[Off] [Low] [Mid] [High]
Description
Select or customise the time alignment settings to reflect
the distance between the listener's position and each
speaker. You need to measure the distance between the
head of the listener and each speaker unit.
1
Touch or
select the alignment speaker.
2
Touch or
selected speaker and listening position.
TIP
If you touch [TA On], the time alignment is turned off mandatorily.
NOTE
This function is available only when the listening position setting
is set to [Front Left] or [Front Right].
Save to recall the following current sound settings by
touching [OK]: slope, subwoofer phase, speaker level,
Graphic EQ, HPF/LPF, listening position, crossover, time
alignment.
TIP
When you touch [Cancel], return to the [Audio] setting screen.
Load the sound settings.
NOTE
[Sound Setting] is available only when you have already saved the
sound settings (page 122).
Set to one of five levels to increase the volume level of the
audio depending on the driving speed.
Adjust the bass boost level.
Select the rear speaker output.
NOTES
• This function is available when [Standard Mode] is selected as
the speaker mode.
• If [Subwoofer] is selected, the rear speaker adjustment is not
available in [Speaker Level], [Time Alignment] and [Crossover].
Compensates for deficiencies in the low-frequency and
high-frequency ranges at low volume.
NOTE
This function is not available while you make or receive a call using
the hands-free function.
- 122 -
to select the listening position then
to input the distance between the