Pioneer AVIC-Z1000DAB Operation Manual page 31

Adding waypoints
1
Touch then touch
2
Touch [Add Waypoint].
3
Search for a location.
4
Touch [Select as Waypoint].
The route is recalculated, and the [Route Summary] screen appears. (When the
waypoint is already set, the [My Route] screen appears. Touch [Show Route] and
proceed to the next step.)
5
Touch [Start Navigation].
Your navigation system starts the route guidance.
Checking route alternatives
You can select another route and compare different route alternatives.
1
Touch then touch
2
Touch [Detours & Alternatives].
3
Touch [Alternative Routes].
4
Touch any of the route calculate conditions.
You can see the approximate time required and total distance of selected route
alternatives. Touch any of the route alternatives to see it on the map.
TIP
If more than three route alternatives have been found, [More Results] appears. Touch [More
Results] to show the other routes.
5
Touch [Select].
The selected route is applied as your current route. For more information about route
calculation conditions, refer to [Route Planning Method] (page 48).
.
.
- 31 -