Adjusting The Color Temperature - Sony GDM-90W01T Operating Instructions Manual

Adjusting the color
temperature
The adjustment data becomes the common setting for all
input signals received.
1
Press the button.
The "COLOR" OSD appears.
2
Press the >?// buttons to select a color
temperature.
The factory settings are:
5000K, 6500K, 9300K

Adjusting the color temperature

Press the ¨./> button to select "VARIABLE," and
adjust by pressing the >?// button.
The figure of the adjusted color temperature changes.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the
To reset, press the ? (reset) button while the OSD is on.
The selected color tempetarure is reset. The adjustments you
made in the expert mode (page 14) are also reset.
COLOR
COLOR TEMPERATURE
5 0 0 0K 6 5 0 0K 93 0 0K
VAR I ABLE
SELECT SET / ADJUST
button again.
Resetting to the factory-
preset levels
1
Press the button of the OSD you want to reset to the
factory setting.
2
When the parameters are arranged in vertical row in
the OSD, select a parameter you want to reset by
pressing the ¨./> buttons.
3
Press the ? (reset) button.
Resetting all adjustment data
When there is no OSD displayed, press and hold the ?
(reset) button for more than two seconds.
All adjustment data including the brightness and contrast
are reset to factory-preset levels.
Resetting the picture size, position,
moire, and geometry* at the same time
When there is no OSD displayed, press and hold the ?
(reset) button for one second.
The above items of the current input signal are reset to
factory-preset levels.
* The "Rotation" adjustment (pages 9, 13) is not reset.
EN
F
D
ES
I
J
11