Table of Contents
Advertisement
Installation and connection
18
6
Undo the door hinge assembly (left)
and the door latch assembly (right),
switch their positions, and replace the
screws (door hinge assembly to the
right-hand side, door latch assembly
to the left-hand side).
INFORMATION!
Use a screwdriver to remove the
plastic part more easily.
7
Undo the door ring and remove it
temporarily.
8
Rotate the door cover by 90°so that the
sign indicating the opening of the door
is on the other side.
9
Rotate the door ring by 180°, install it
onto the door, and fasten it with screws.
Advertisement
Table of Contents
